Energy-efficient hall heating with up to 30% cost savings. Radiant heaters bring heat where it's needed.
Radiant heaters transfer heat directly to surfaces and objects. This prevents heat pockets under the hall ceiling and you benefit from significant energy savings with higher comfort.
Through direct heat transfer, the air temperature can be reduced by 2–4 °C, which means energy savings of approx. 7% per degree.
Instant heat ensures pleasant working conditions from the first minute. Reduced air turbulence noticeably improves the indoor climate.
Radiant heaters convince with compact design and simple installation. The components used guarantee maximum operational safety.
Our radiant heaters are suitable for a wide range of applications in industry, commerce and public facilities. Wherever efficient hall heating is required.
Understand the difference between conventional warm air heating and modern radiant heating. The temperature distribution clearly shows the advantages of radiant heater technology – warm air rises and collects under the hall ceiling, while radiant heat works precisely where it's needed: in the occupied area.
Conventional heating with air circulation. Heat pockets and energy losses under the hall ceiling as well as uneven temperature distribution in the room.
✗ Long heating times (45-90 min.)
✗ Air turbulence and drafts
✗ High energy consumption (+35%)
Direct heat transfer through infrared radiation. The heat works specifically on people and objects. Without detour through the air and almost without heat losses.
✓ Instant heat (5 min.)
✓ No air turbulence
✓ Energy savings (30%)
Radiant heaters show their strengths especially in high halls, zones with frequent door opening and for precise heat distribution (workplaces, picking lines, loading zones). We plan the suitable system with you – including heating load estimation and heater layout.
As experts in industrial radiant heaters, we offer you three high-quality Pakole series for different requirements. All our industrial radiant heaters convince with automatic ignition, heat-resistant ceramics and Honeywell ignition electronics.
The premium series for highest demands. With insulated reflector screen and maximum efficiency, ideal for large industrial halls.
The optimal balance between efficiency and economy. Perfect for medium to large commercial halls.
The proven entry-level solution for smaller halls and workshops. Reliable and low-maintenance.
Bright heaters are gas heating devices that are directly heated by an atmospheric burner. They are called "bright heaters" because the generation of infrared rays occurs through visible combustion. The perforated ceramic plates heat up to 950°C and emit infrared rays, which are directed downward into the occupancy area by reflectors.
Bright heaters work on the principle of radiant heat. They transfer heat directly to surfaces and objects instead of heating the air. This happens through:
Warm air heating:
Bright heaters:
No, bright heaters and dark heaters are two different infrared heating systems. Bright heaters work with open combustion and glowing ceramic plates that generate infrared radiation. Dark heaters, on the other hand, have closed combustion and do not emit visible brightness, but generate heat via heated pipes or sheets.
Energy savings typically amount to 30-40% compared to conventional warm air systems. This is achieved through:
Bright heaters do not cause air turbulence like warm air systems, as no fans are used. This means less dust, allergens and pollutants are stirred up, leading to a more pleasant room climate – particularly beneficial for allergy sufferers and in dust-sensitive areas.
Yes, radiant heat distributes very evenly as it acts specifically on floors, machines and people. No cold or heat pockets form under the ceiling. The temperature in the occupancy area is noticeably pleasant and stable – even with high ceilings.
Bright heaters are particularly suitable for large and high rooms:
Bright heaters are particularly efficient in high halls as they radiate heat directly downward. They are optimally suited for:
Bright heaters are ideal for workshops:
Bright heaters are primarily designed for indoor use, but can also be used in protected outdoor areas (e.g. covered loading zones, open warehouses). Important is protection from direct rain and wind, as these can impair heat delivery.
Pakole GHI Series (Premium):
Pakole GHI-ECO Series (Mid-range):
Pakole GH Series (Entry):
The bright heaters are available in various power levels:
Yes, for special requirements such as dusty, humid or corrosive environments, there are bright heaters with adapted protective coating, stainless steel components or increased corrosion protection. This makes them usable even in demanding areas such as sawmills, foundries or agriculture.
The lifespan of a bright heater is usually 15–20 years or more, with regular maintenance and care. The ceramic plates and reflectors are durable and can be easily replaced if needed.
Installation of bright heaters is uncomplicated thanks to their simple construction:
Yes, bright heaters are very suitable for retrofitting:
Bright heaters are very low-maintenance due to:
Installation and maintenance of bright heaters should always be carried out by a certified specialist company that has the appropriate knowledge in gas installation and heating technology. This ensures operational safety and preserves any warranty claims.
The total price of a bright heater system depends on several factors:
Operating costs are significantly lower than with conventional systems:
Bright heaters can be offered both individually and as part of a complete heating concept. In practice, a complete solution with consultation, device selection, planning, assembly and commissioning is common. This gives you a transparent total calculation including all components and services. Individual devices can also be retrofitted if desired, e.g. for extensions.
Thanks to high energy savings (30–40%), bright heater systems usually pay for themselves within 2 to 5 years – depending on usage, energy prices and hall size.
Documentation and technical documents for the GH series bright heaters.
Comprehensive documentation for the GHI series bright heaters.
Downloads for the energy-efficient GHI-ECO series bright heaters.
Information and documentation on the RADIAMON CAT-REY system.
Product brochure and information on the Gasolec M series for agricultural applications.
Installation instructions and assembly aids for the M series agro heaters.
Documentation for the GPC-300 control unit for agro heaters.
Information on the MIN/MAX control HLM for optimal temperature regulation.
Information on ELVHIS - European Association for Bright Heaters and Infrared Systems.
Direct link to the Pakole manufacturer website for further product information.
Information about our partner Gasolec International for agro heating solutions.
Partnership with Vitogaz Switzerland for liquid gas supply.
